Hole Cutter With Exchangeable Arbors

Hole Cutter With Exchangeable Arbors

A countersink bit is a type of drill bit that allows you to widen the entrance to a pilot hole so that the screw head is flush with the surrounding metal rather than sticking out on top of it.

What is a Countersink Bit?

What is a Countersink Bit?

A countersink bit is a type of drill bit that allows you to widen the entrance to a pilot hole so that the screw head is flush with the surrounding metal rather than sticking out on top of it.

What is Magnetic Drilling Machine?

What is Magnetic Drilling Machine?

A magnetic drilling machine is used for cutting holes in metals on the worksite. It is a portable drilling machine with a magnetic base (electromagnetic or permanent magnet base) and a cutting tool attachment. Equipped with a strong magnetic base, the portable magnetic drilling machine is able to adhere to steel or other magnetic materials (ferrous metal) surface horizontally, vertically, or upside down.

How to drill Thick and Large Diameter Holes?

How to drill Thick and Large Diameter Holes?

3keego annular cutter HCLF Type is designed to drill holes in thick metal sheets. With large diameter of cutting holes, HCLF is ideal in the shipbuilding industry.

What is a step drill/ step bit/ step drill bit?

What is a step drill/ step bit/ step drill bit?

What is a step drill? A step drill, also known as stepped drill bit, step drill bit or step bit, is used for drilling a hole or enlarging an existing hole in thin sheet metal. Not only drilling, a step drill also can chamfer and deburr the cutting edge of workpiece by using the bevel of the next step.

What are Hole Saws or Hole Cutter?

What are Hole Saws or Hole Cutter?

A hole saw or hole cutter consist of steel cylinder mounted on anarbor and construction with power drills to cuta circular hole through a workpiece.Most hole saws have fairly short aspectratio of diameter to depth and they areused to cut through relatively thin workpieces .

Why Drill Metal with Annular Cutter (Mag Drill Bits) in Magnetic Drill?

Why Drill Metal with Annular Cutter (Mag Drill Bits) in Magnetic Drill?

Since an annular cutter removes only the material at the periphery of the hole, it is 3 to 4 times faster than twist drill bit. Besides, an annular cutter with pilot pin can finish a hole by one operation without pre-drilling for a pilot hole.

Why Do You Use a Rebar Cutter ? (With Video)

Why Do You Use a Rebar Cutter ? (With Video)

For construction industry or house renovation, drilling concrete is unavoidable. When drilling a hole into concrete, there is a high chance to encounter the concrete-embedded rebar. The rebar steel can be an obstacle for a standard hammer dill bit to drill through.

Drill and Tap a Screw Hole in Sheet Metal in One Step (With Video)

Drill and Tap a Screw Hole in Sheet Metal in One Step (With Video)

Drill tap is a combination of drill and tap to drill, tap and chamfer a through hole in one quick step. You can create many common screw holes for machine screws and bolts by inserting the drill tap into impact driver without switching cutting tools which really saves lots of time and money.

How to Use a Step Drill Bit Properly?

How to Use a Step Drill Bit Properly?

Step drills are drill bits easy to cut and enlarge a wide range of holes on thin sheet metal, plastic and other materials at a lower speed. Due to the stepped design of multiple diameters, you can drill different-sized holes by one or two step drills. Use an appropriate step drill in a right way can help you make good works.

About 3keego Cutting Tools - Hole Cutters and Annular Cutters

About 3keego Cutting Tools - Hole Cutters and Annular Cutters

Hole cutters, annular cutters, magnetic drilling machines, accessories, and other cutting tools have never been so surprisingly high-quality as it is today. 3keego has been dedicating in innovating this field for 40 years and counting. Not only high-quality products but 3keego also provide efficient and timely customer service globally.

Frequently Asked Questions - Technical

Frequently Asked Questions - Technical

Do we need to add a water-coolant? When it becomes difficult to cut, what can we do? How to fasten the shank of annular cutters?